The F series vacuum units are characterised by low noise level, up to 75 dB(A), and compact footprint. The F series vacuum units are available in two versions (side channels or claw pump): this allows always the best technical solution for the specific need. Such design makes them suitable for standalone installation beside the IMM and centralized feeding systems or to feed systems with medium to high pressure losses and high kg/h throughput.
I ricevitori della serie CS sono appositamente progettati per le scaglie. Le scaglie sono particolarmente complicate da trattare per via della loro tendenza a creare ponti. L’angolo del cono e la disponibilità di rompi ponti assicurano lo scarico del materiale.
Per materiali molto leggeri si possono montare bocche pneumatiche.
The CDF condensing unit is the solution developed by Piovan for removing low-boiling contaminants from the process air, released during the drying process of post consumer products like rPET or flakes. Metallic filters remove dust particles before the condensing phase. The cooling batteries then remove the low-boiling oils which drop into collecting tank easy removable.
The T1 hoppers are specifically designed for high capacity productions. These insulated drying hoppers are characterised by optimum ratio between height and diameter for proper heat exchange. Made in stainless steel for preserving at best the processed material, T1 hoppers are easily accessible to all their parts, thanks to the inspection door.
Lybra LG is a continuous weight-loss gravimetric doser that can be easily integrated in supervision system. The dosing auger available in 3 configurations, single, dual or triple flight screws, assures high level of accuracy and repeatability. The intuitive graphical user interface allows the operator to control the main parameters such as actual and set values or instantaneous production and access all unit’s functions. The central body is provided with a static mixer that makes the additives entering in the middle of the virgin column, assuring a perfect mixing.
GMP is a single or multi hopper drying system, that can adapt and automatically control operating parameters, such as temperature, dew point and flow rate of the process air, according to the production detected. The GMP range is available in 3 configurations: SMART, PLUS and ADAPTIVE. In case of many different raw materials to dry, one GMP dryer can be combined with a multi-hopper system.
Suitable for granules, flakes and regrind materials, the CR crystalliser assures the best crystallisation, improving the drying phase. The design has been specifically developed to exceed the material glass transition temperature and to guarantee homogeneous crystallization, assuring optimal flow of the material. Crystallising hoppers are equipped with high efficiency planetary motor gears to guarantee low rotation speed of the vertical paddle shaft and minimize dust creation. The process is kept under control with a complete set of temperature probes and level sensors.
