回收利用

• • 单手即可快速轻松地完成耦合操作
• • 外部密封，避免污染和真空泄漏
• Error-proof receiver source coupling

From 2 to 200 litres for granules

• Many sizes available
• Long lasting stainless steel construction
• Effective and rapid cleaning with electric cables and vacuum pipes connected

From 30 to 200 litres for flakes

• Specifically designed for material prone to bridging
• Ease material discharge for production continuity
• Suitable for high throughput

适用于各种有效载荷和产品 

• • 最大流量 
• • 保护产品 
• • 能耗低、噪音小 

从 40 到 300 公斤，用于颗粒、薄片和粉末

• 实时测量
• 通过与 Winfactory 4.0 集成的生产统计
• 对于任何接收器

• Smooth internal surface
• Wide range of diameters available
• Special execution for abrasive material

• Enhanced filtering thanks to the segregation of filtering cartridge from the collecting bin
• Robust Polyester filter
• Filter cleaning with line in operation

Low to medium throughput
From 0.75 to 12.6 kW

• 紧凑而安静
• 免维护电机
• 快速便捷的过滤清洗操作

• 用于生产自动化
• 使用方便
• 用于管理复杂进料系统的广泛设备兼容性

• No filter cartridge
• Minimal cleaning requirements
• Avoids blocking of traditional filters

• For dusty materials
• Limited maintenance
• Different types of filters available

• High filtring capacity
• 易于清洁
• Increases the vacuum unit life

• Simple, ethernet connectivity for power and control
• Infinite Low-Cost DIY Expansions
• PC Server HMI with up to 16 Clients PCs or Tablets with Machine Auxiliary Interface

• Optimal material separation - typically more than 99.99%
• Abrasion resistant right-angle material inlet
• Low operating costs due to lack of screen filter maintenance

• Efficiently removes substantial levels of fines conveying moderate to dusty materials and regrind
• Easily removable collection can with sightglass
• Prolongs life of pump pre filter and reduces maintenance

• Positive sealing for vacuum, pressure, or gravity type systems
• Pneumatic or hand actuated
• Stainless steel material contact points

Prevents leakages in conveying systems

• Positive sealing of vacuum chamber inlets
• Pneumatically plunger style valve
• For easy retrofit to existing equipment

Quick release access cover with safety Lock-Out

• Stainless steel construction
• Wear resistant surfaces
• 110/220/ 24 Vac, and 24 Vdc control

Quiet operation with full sound enclosure

• Vacuum breaker valve for fast cycle loading
• Available in 25HP
• Single or Multi-Pump configuration

Quiet operation with sound enclosure

• Vacuum breaker valve for fast loading
• Available in 3, 5, 7.5, 10 and 15HP
• Single or Multi-Pump

Efficient Filtering of the Return Vacuum Line

• Easy access to filters
• Small footprint
• Swing bolts for easy lid removal

Removes heavy fines, maximises equipment lifespan and minimises maintenance

• Free standing
• Easily removable can with sightglass
• For most vacuum conveying systems

Optimal vacuum power, excessive fines filtering and easy maintenance

• 模块化设计
• Heavy duty stainless steel construction
• Available in "Easy Flow" style for hard to flow materials(3.0 and 6.0 cu. ft. only)

• Pressure control
• Big Bag emptying and filling stations
• Bag emptying stations

从 5 升到 75 升，用于颗粒

• 免维护
• 耐磨
• 适用于超洁净环境

• Integration with Easy3/Easy3+ system
• Easy to maintain and clean
• Transparent and abrasion resistant body

• Improving pellet quality
• Removing contaminations
• Extend use of PCR, even in high demanding application

From 1,000 to 6,000 m³/小时

高达 2,500 升

• Efficient thanks to the effective thermal insulation
• Easy accessible
• Optimum drying thanks to proper heat distribution and material flow

From 3,000 to 13,500 l

• Optimum heat distribution and material flow
• Efficient thanks to the effective thermal insulation
• Residence control thanks to load cells or level sensor

从 400 到 2,900 米³/小时

• For ambient temperature up to 45°C and humidity up to 85%
• 易于维护
• 占地面积小，可安装在夹层或地板上的主机附近

• 用于处理任何种类的再生PET
• 污染物提取
• 最大化生产线使用寿命

从250到3500立方米每小时

• 完全自适应运行
• 自动调节和稳定气流
• 再生热回收系统

400 至 3,500 立方米/小时³/小时

• • 降低最终产品成本
• • 自动适应操作，实现绝对的工艺稳定性
• • 适用于各种聚合物，包括回收材料

从 20 到 4,400 米³/小时

• 精确的温度控制
• 不锈钢料斗
• 防潮材料的最佳解决方案

从 650 到 1,400 米³/小时

• 持久可靠的机器
• 使用方便
• 适用于多种聚合物

从 200 到 450 米³/小时

• 持久可靠的机器
• 使用方便
• 适用于多种聚合物

• Ideal for processing dusty material
• Cyclonic technology
• Easily maintenance

从 150 到 4,000 dm3³

• 适用于颗粒、片状和再生材料
• 坚固可靠
• 均匀搅拌物料

• 采用 PureTech 技术，以达到高效地过滤能力
• Auto adaptive control to maximize condensation process
• Maximum energy efficiency, thanks to the integrated recovery system

• Homogeneous thermal conditioning and lowest residual moisture
• Auto-adaptability
• Broad range of configurations

Retro-fit conversions for process air dryers

• Exclusive non-ceramic burner
• Constructed of corrosion resistant stainless steel
• Digital temperature control

Solid cone promotes better air distribution

• Insulated throat to lid
• Insulated side walls and access door
• Machine, mezzanine or stand mounted

Cone to lid insulated and energy efficient

• Stainless steel construction, inside and out
• Large exterior and interior access doors
• Quick material change

Handles hard to flow materials

• Slide gate material shut-off
• Easy to clean and maintain
• Cone to lid insulation

• Energy efficient, closed loop drying
• Gas or electric process & regeneration heaters
• Extremely stable dewpoint up to -100ºF

• Average dewpoint to -100ºF with flatline temperature profiles
• Automatically adjusting
• Energy savings with heat recovery

• Suitable for drying non-hygroscopic plastic materials
• Continuous hot air-stream
• Available in gas or electric

• Energy efficient - Gas or electric operation
• -40 Dewpoint standard
• 300CFM to 10,000 CFM available

Everything you need to know at your fingertips

• Real-time, on-screen graphing of all key datapoints allows easy check of operational parameters
• Control regeneration by dewpoint or time settings
• Seven-day clock allows automatic operation on either a one-time or repetitive basis

Up to 3,968 lbs/hr

• • 配料精度和准确度高
• 快速更换材料和简化清洁操作
• Mixer without material stagnation thanks the new design. Redesigned mixing shafts for better homogenization of the batch

高达 3,000 公斤/小时

• 可扩展配置
• 快速更换材料和简化清洁操作
• 可用于薄片和高温

高达 800 公斤/小时

• • 配料精度和准确度高
• • 快速换料，清洗简单
• Perfect mixing without stagnation of the components with semi spherical shape and special shaft design

从0.005到150 kg/h

• 得益于广泛的齿轮减速和倾斜螺杆几何形状，精度高
• 中央块设计带来完美的流动
• 简单快速的清洁程序

从 0.21 到 190 公斤/小时

• 采用无刷电机和倾斜计量单元，精度高
• Easy to use with microprocessor control, 7” touch screen and Ethernet
• 适用于低熔点添加剂

从 0.21 到 190 公斤/小时

• 高精确度
• Easy to use with microprocessor, 7” touch screen and Ethernet
• 适用于低熔点添加剂

• Suitable for granules, flakes, regrind, additives and powder
• Suitable for starve feeding extruder
• Complete control of extrusion line

Mistura homogênea a cada batch

• Configuração customizada
• Dosagem precisa e alta repetibilidade do processo
• Uso amigável e comunicação imediata com operador

Modular design with quick disconnects for all feeder components

• Throughput rates from 0.5 to 1000 PPH
• Resin drain-out port
• Two feed bin sizes available

Accurately blends resin of various bulk densities by weight

• Homogenizing mixing chamber
• SPI protocol
• Throughputs up to 10,000 PPH

Up to 500 tons

• Tailor made solutions for different applications and materials
• Fully integrated storage, material loading and distribution system
• Turn-key solutions including delivery and installation

Up to 15,000 kg/h

• Compact and stand-alone unit
• Mobile solution
• Turn-key

Up to 3,400 l

• Modular solution
• Maximum space utilisation
• Adjustable in time

Up to 2,000 kg capacity

• Modular frame
• Deliverable for local easy assembly
• Available for granules or flakes

• Complete control and monitoring of the process
• High level of customization
• Integration of different systems

• 所有原材料和最终产品批次均可追溯
• 所有警报清晰可见
• 所有数据最长可保存 10 年

• 全面监控能耗
• 消耗优化的报告和分析
• 开放用于集成多个电能表

• Verification of contaminant removal
• Maximisation of filter life and verification of its effectiveness
• 使用方便

• • 自动、简单、可靠
• • 实时读数，反应迅速
• • 在线分析，无需采集样品

• • 经济高效的干燥性能检查
• • 即时结果
• • 便于携带

• 持续的过程控制
• 高精度
• 易于使用

高达 2,100 公斤/小时

• 先进的切割动作减少了能源消耗、热量和粉尘的产生
• 耐磨转子
• 易于清洁和维护

高达 1,400 公斤/小时

• 专为塑料、橡胶和轻金属的高质量造粒而设计
• Advanced “Scissor” cutting action, reduces energy consumption, heat and dust generation
• 料斗和筛网支架确保方便快速清洁和维护

适用于重载应用

• 配有PLC设计充分的用于管理不同的应用程序，有机会选择不同的自动加工程序
• 一个新的系统来固定已安装的并获得专利的转动刀片，具有切削角度，帮助回收困难的部件，实现大量生产且低能耗
• 适用于回收塑料材料，薄膜，汽车部件和电缆，木材，纸类等等

高达 2,000 公斤/小时

• 低噪音、低粉尘排放的真空抽吸系统
• 易于清洁和维护
• 坚固紧凑的结构

Up to 700 kg/h

• High wear resistance with side plates configuration
• Advanced “Scissor” cutting action, reduces energy consumption, heat and dust generation
• Hinged hopper manually operated for easier cleaning and maintenance

Up to 5,000 kg/h

• Long blade life time
• Very fast blade replacement
• Adjustable rotor and bed knives or disposable U&G knives available